How to Use the Lost Mary BM6000 Kit: A Simple Step-by-Step Guide

May 20, 2026

How to Use the Lost Mary BM6000 Kit: A Simple Step-by-Step Guide

The Lost Mary BM6000 Kit is designed to be easy to use, even if you are switching from disposable vapes or trying a pod-style device for the first time.

Unlike older single-use Lost Mary products, the BM6000 uses a rechargeable device, a prefilled pod, and a refill container that work together to keep the kit going for longer.

This guide explains exactly how to set it up, how to use it, and what to do if you are unsure at any stage.

Quick answer: how do you use the Lost Mary BM6000?

Remove the kit from the packaging.
Take off any protective stickers or silicone seals.
Insert the refill container into the device.
Turn the device upside down and gently shake it to help the liquid feed through.
Remove the airflow sticker if present.
Inhale through the mouthpiece to vape.
Recharge with USB-C when needed.

What comes with the Lost Mary BM6000 Kit?

Part	What it does
BM6000 device	The rechargeable battery section
Prefilled pod	Delivers the vape experience
Refill container	Supplies e-liquid into the pod system
USB-C charging port	Recharges the device when battery is low

Step 1: Remove the device from the packaging

Open the box and take out the BM6000 kit.

Before doing anything else, check for:

Protective stickers
Silicone seals
Any tab covering the mouthpiece or airflow area

These are there to protect the kit before first use and should be removed before vaping.

Step 2: Insert the refill container

The refill container needs to be placed into the BM6000 device before use.

Hold the device upright and carefully insert the container into position until it feels secure.

Why this step matters

The refill container is what helps supply e-liquid into the pod system. If it is not fitted properly, the kit may not perform as expected.

Step 3: Prime the pod before your first vape

This is one of the most important steps.

Once the refill container is inserted, turn the BM6000 upside down and gently shake or tap it so the e-liquid can move into the pod.

Why priming matters

Priming helps the pod absorb e-liquid before you vape. This helps:

Reduce the risk of a dry or burnt taste
Improve the first few puffs
Help the kit work as intended from the start

Step 4: Remove the airflow sticker if needed

Some kits may have a small protective sticker covering the airflow area during transit. Remove it before use.

If this is left on, airflow may be blocked and the device may not draw properly.

Step 5: Inhale to vape

The Lost Mary BM6000 is designed for easy everyday use. Once it is assembled and primed, you simply inhale through the mouthpiece to vape.

There are no complicated settings to adjust for basic use, which makes it especially suitable for beginners or customers moving away from single-use vapes.

How do you know when to charge the Lost Mary BM6000?

The BM6000 is rechargeable, so when the battery runs low, connect it with a USB-C charging cable.

When to charge	What to do
Battery is running low	Plug into USB-C
Vapour feels weaker than normal	Check whether the device needs charging
Device stops activating	Recharge before replacing anything

How do you replace the pod or refill container?

Once the e-liquid has been used up, replace the compatible pod and refill components rather than throwing away the whole battery device.

This makes the BM6000 a more practical everyday option for customers who like the Lost Mary style but want a reusable setup.

Common beginner mistakes to avoid

1. Vaping before the pod is primed

Using the device too quickly after setup may lead to a poor first taste. Give the liquid time to feed through properly.

2. Forgetting to remove seals or stickers

Protective covers can block use, so check the mouthpiece and airflow area before starting.

3. Assuming the battery is faulty when it only needs charging

Because the BM6000 is rechargeable, a low battery does not mean the device is finished. Recharge it before assuming there is a problem.

Lost Mary BM6000 setup checklist

Setup step	Done?
Packaging removed	☐
Protective stickers and seals removed	☐
Refill container inserted	☐
Device turned upside down to help prime the pod	☐
Airflow sticker removed if present	☐
Device ready to inhale	☐

Is the Lost Mary BM6000 easy for beginners?

Yes. The BM6000 is built for users who want a simple vape with minimal setup. The main thing beginners need to understand is the first-time priming step.

Once that is done, day-to-day use is straightforward: inhale to vape and recharge when needed.